Evaluation Kit SEK-SVM4x
Thank you for being interested in our SGP40 and/or SGP41 sensors! Below you will find all necessary documents as well as useful information regarding evaluation and prototyping. In case of further questions please contact our technical customer support team under www.sensirion.com/contact.
Your Evaluation Kit contains:
- SVM41 Development Board
SGP41 VOC+NOx sensor and SHT40 humidity and temperature sensor
UART and I2C interface via 6-pin Molex Micro-Lock Plus connector
Supply voltage VDD: 3.3 or 5.0 V
Size: 39.0 x 15.0 x 5.5 mm3
- USB-UART cable (6-pin) to connect the SVM41 development board directly to a USB port, e.g. on a PC
- Jumper wire set (6-pin Micro-Lock Plus cable set) to connect the SVM41 development board to embedded platforms like Arduino, Raspberry Pi, etc.
A 10-pin 0.1" pitch-gender changer is also provided.
Red cable = VDD
Black cable = GND
Green cable = SDA (I2C) or RX (UART)
Yellow cable = SCL (I2C) or TX (UART)
Blue cable = SEL (interface select – connect to GND for I2C, connect to VDD or leave open to select UART)
Purple cable = NC (do not connect)
Quick Start Guide
Start evaluating your SGP41 VOC+NOx sensor in two simple steps:
1) Either download the SEK-ControlCenter viewer software (available for Windows, Linux and MacOS) or download one of our example drivers for your embedded platform (see links below). A simple step-by-step quick start guide can be found here.
2) Connect the SVM41 development board to your computer/embedded platform with the help of the adapter and start measuring