Evaluation Kit SEK-SVM40
Thank you for being interested in our SGP40 sensor! Below you will find all necessary documents as well as useful information regarding evaluation and prototyping. In case of further questions please contact our technical customer support team under www.sensirion.com/contact.
Please, update the firmware of your SVM40 to the latest version by connecting the board via the provided USB-UART cable to a computer and run the latest version of ControlCenter (version should be ≥1.26.0). The software will automatically guide you through the update process when the SVM40 is connected. In case the automatic update does not start, one can manually install the firmware in ControlCenter by downloading the latest image from github.
Your Evaluation Kit contains:
- SVM40 Development Board
SGP40 VOC sensor and SHT40 humidity and temperature sensor
Vdd range: 3.0 to 5.5 V
- USB-UART cable to connect the SVM40 development board directly to a USB port, e.g. on a computer
- Jumper wire set to connect the SVM40 development board to embedded platforms like Arduino, Raspberry Pi, etc..
Red cable = VDD
Black cable = GND
Green cable = SDA
Yellow cable = SCL
Blue cable = SEL
Purple cable = NC
Quick Start Guide
Start evaluating your SGP40 VOC sensor in two simple steps:
1) Either download the SEK-ControlCenter viewer software (available for Windows, Linux and MacOS) or download one of our example drivers for your embedded platform (see links below)
2) Connect the SVM40 development board to your computer/embedded platform and start measuring