Digital Humidity Sensor SHTC3 (RH/T)
Our New Standard for Consumer Electronics
The SHTC3 digital humidity sensor builds on the success of the proven SHTC1 sensor. Thanks to a broader supply voltage range (1.62 – 3.6 V) and higher accuracy (±2% RH, ±0.2°C) than its predecessor, it enables greater flexibility.
Sensirion’s CMOSens® Technology offers a complete sensor system on a single chip, consisting of a capacitive humidity sensor, a bandgap temperature sensor, analog and digital signal processing, A/D converter, calibration data memory, and a digital communication interface supporting I2C fast mode. The small 2 x 2 x 0.75 mm3 DFN package enables applications in even the most limited space. The sensor covers a humidity measurement range of 0 to 100% RH and a temperature measurement range of -40°C to 125°C with a typical accuracy of ±2% RH and ±0.2°C. The broad supply voltage of 1.62 V to 3.6 V and an energy budget below 1 μJ per measurement make the SHTC3 perfectly suited to mobile or wireless applications powered by battery.
With the industry-proven quality and reliability of Sensirion’s humidity and temperature sensors providing constant accuracy over a large measurement range, the SHTC3 offers the best performance-price ratio. Tape and reel packaging combined with suitability for standard SMD assembly processes make the SHTC3 ideal for high-volume applications.
Overview Specifications
| Name | Typ. Humidity Accuracy %RH | Typ. Temperature °C | Supply Voltage V | Interface | Package Size (L x W x H) mm | Datasheet | Buy |
|---|---|---|---|---|---|---|---|
| SHTC3 | ±2.0% | ±0.2 | 1.62 to 3.6 V | I2C | 2 x 2 x 0.75 | Download |  |
Features
| Interface | I²C |
| Supply voltage range | 1.62 - 3.6 V |
| Current consumption | 0.5 μA (at 1 reading per second in low power mode) |
| Measuring range (RH) | 0 - 100% relative humidity |
| Measuring range (T) | -40 to +125°C (-40 to +275°F) |
| Response time (RH) | 8s (tau63%) |
Delivery Conditions
| Packaging | Tape & Reel, sealed in ESD bags |
Packaging sizes Minimum order quantity | 2'500 or 10'000 pieces per reel 2'500 pieces |
Accuracy Limits for Relative Humidity and Temperature
Test Our Environmental Sensors with Sensirion’s Evaluation Kits
With plug-and-play hardware, user-friendly viewer software and compatibility with all environmental sensors, SEK-Environmental Sensing makes evaluation easier and faster than ever before. This allows our customers to focus on developing innovative sensor applications.
Sparkfun Released SHTC3 Breakout Board
The SHTC3 is a low cost, easy-to-use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for building a weather station or humidor control system. All you need are two lines for I2C communication, and you’ll have relative humidity readings and very accurate temperature readings as a bonus!
Hook up is a breeze with as the breakout board is using the Qwiic connect system. The breakout board has built-in 2.2kΩ pullup resistors for I2C communications. If you’re hooking up multiple I2C devices on the same bus, you may want to disable these resistors.
Get one now by clicking here.
Breakout Board Temp&Hum 9 Click
Temp-Hum 9 click is a smart temperature and humidity sensing click board™, packed with features that allow simple integration into any design. It can measure a wide range of temperature and relative humidity values with high accuracy. The SHTC3 sensors used on this Click board™ offers the complete measurement system: capacitive RH sensor, bandgap thermal sensor, analog and digital data processing, and the I2C communication interface. Featuring a good reliability over time, high accuracy, and low hysteresis, it is an ideal solution to be used in various temperature and humidity related applications.
Temp-Hum 9 click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
