Sensirion, the expert in environmental and flow sensor technology, is celebrating another milestone in the company’s history. Today, the billionth sensor left production. This success has only been ...

Sensirion is one of the best employers in Switzerland – not only among permanent employees, but also among apprentices. Following Great Place to Work® naming Sensirion, the international manufacturer ...

We are proud to announce that the new SHT40 Smart Gadget is now available globally through Sensirion’s distribution network. The SHT4x Smart Gadget is a reference design circuit board which ...

Qmicro by Sensirion, the innovative OEM provider of miniaturized gas chromatograph analyzers, is proud to support MeterQ Solutions GmbH with its microGC technology. MeterQ, a solution provider in the ...

“Making Life Smarter” perfectly encapsulates what Govee stands for. With a customer-centric and innovation-focused approach, Govee develops cutting-edge LED lights and smart home devices that ...

The success continues! Sensirion has once again been named one of the top employer in Switzerland by Great Place to Work® in the Large Company category. Sensirion also received the special Crisis ...

Sensirion, the flow and environmental sensors expert, proudly presents its new SFC5500 mass flow controller series. The SFC5500 is the world’s first mass flow controller available via catalogue ...

Sensirion, the expert in environmental and flow sensor solutions, is proud to announce its new partnership with Burnon International. Under the distribution agreement, Burnon International is ...

Sensirion Holding AG completes the acquisition of IRsweep AG, an innovative provider of optical sensing solutions. IRsweep, based in Stäfa, Switzerland, develops, manufactures, and supplies optical ...

Now you can take proximal measurements, not only of respiratory gas flow rates, but also of associated ventilation pressure, in a single solution – this product is the result of a collaborative effort ...

We proudly announce global availability of our drastically miniaturized CO2 sensor through our distribution network. Compared to its predecessor, the SCD4x CO2 sensor is seven times smaller and offers ...

Reserve your seat for the roundtable “Breath in - Data out: Get the Most Data out of Your Sensors” on April 20, 15:00 – 16:00, at SAP NOW – the largest SAP user conference in Switzerland. Matthias ...

Tive’s in-transit visibility solution replaces passive data loggers with real-time visibility into the location and condition (temperature, humidity, shock and light) of sensitive cold chain goods ...

Reliable temperature monitoring in the complexity of a modern logistics network therefore requires trustworthy data loggers, which are increasingly (pushed by regulations such as EN 12830) accepted ...

Today, 25 March 2021, at its first capital markets day Sensirion will present an update on its growth strategy and mid-term outlook. Sensirion Holding AG’s growth strategy is based on four strategic ...

Health has a higher importance than ever before and the pursuit of well-being has increased sharply in recent years. Health awareness is deeply rooted in society and defines quality of life. More and ...

In 2021, Sensirion again meets all the criteria needed to be certified as a fantastic place to work in Switzerland by "Great Place to Work®", the expert in workplace culture and employer ...

2020 proved to be very multi-faceted for Sensirion. Based on the ramp-ups of the new product families of carbon dioxide (CO2) and particulate matter (PM2.5) sensors and strong market diversification, ...

Sensirion products manufactured at UMC include temperature sensors for COVID-19 vaccine transport and flow-sensors for medical ventilators. In the post-pandemic era, the most critical resource is ...

Highly regulated products, such as pharmaceutical or perishable goods, typically require special handling along their distribution chain to comply with several directives. Manufacturers are obligated ...

We proudly present our new formaldehyde sensor module, the SFA30. The SFA30’s innovative electrochemical cell design, dedicated electronics including an onboard Sensirion humidity and temperature ...

We are pleased to announce that LAIR GmbH, formed by Intelligent Data Analytics GmbH & Co. KG, relies on several environmental sensors from Sensirion in its new room air monitor. LAIR ONE monitors the ...

The evaluation kit contains a SCD41 CO2 sensor mounted on a development board with a JST connector and through-hole pins. The included adapter cable (JST-Ethernet) connects to Sensirion’s ...

Sensirion Holding AG completes the acquisition of Qmicro B.V., an innovative OEM supplier of miniaturized gas-analysis technologies. Qmicro, based in Enschede, The Netherlands, develops, manufactures, ...

Sensirion, the expert in environmental and flow sensor solutions, is proud to announce its new partnership with Anglia Components. Under the distribution agreement, Anglia is franchised to sell ...

Sensirion is pleased to announce that the company LivingPackets uses Sensirion’s humidity and temperature sensors in its revolutionary and sustainable packaging solution. Through the use of ...

StarFish Medical, Canada’s leading full-service medical device design company, redeveloped a 30-year-old Winnipeg ventilator prototype to support the Canadian government with up to an additional 7,500 ...

Sensirion announces to be part of a CHF 4 million Series A financing round of MaxWell Biosystems AG, a spin-off of ETH Zurich founded in 2016, to further industrialize and scale-up the production of ...

Sensirion raises its forecast for the financial year 2020. As a result of continuing high demand for gas flow sensors in connection with the COVID-19 pandemic the sensor manufacturer expects now ...

We are pleased to announce that Cleveron AG has chosen our SCD30 CO2 sensor for its new CO2 monitoring device. CLEVER Sense enables effective and smart ventilation in closed rooms and impresses with ...

We are delighted to announce that our internally developed CO2 monitoring system will be installed for free in 2,500 classrooms in the canton of Zurich. The system will reduce the viral transmission ...

Climate neutrality, sustainability and the reduction of CO2 emissions are now global trends. The decarbonization of the energy sector plays an important role in this context, as this sector ...

The LD20-2600B single-use liquid flow sensor for fast, precise and reliable measurements of the lowest flow rates in biomedical applications was successfully launched three years ago. The evaluation ...

In cooperation with Lee Guitars and Qingping, we are proud to launch the first thermal hygrometer for guitar safety. Equipped with our SHTC3 sensor, the thermo-hygrometer facilitates the maintenance ...

Sensirion presents the new ultra-low power humidity sensor SHT40 for battery-driven applications and high-volume consumer electronics. The SHT40 is part of Sensirion’s 4th generation of humidity ...

We are proud to announce that the new STC31 CO2 sensor for measuring high CO2 concentrations is now available globally through Sensirion’s distribution network...

Sensirion is pleased to announce its collaboration with micropump manufacturer TTP Ventus Ltd on the design of a compact high-performance microfluidics driver. The system has been created to support ...

We are pleased to announce that ISIS IC GmbH has chosen Sensirion’s SCD30 CO2 sensor for its CO2 signal lights for classrooms, thus enabling reliable and accurate measurements in schools. The SCD30 is ...

Flow cytometers are used for high-throughput cell analysis. In these devices, cells flow past an analysis unit (e.g. voltage or fluorescence read-out) at high velocity. The recorded voltage or light ...

Made to Measure – the new product variant in the SLF3x liquid flow sensor series is now available in distribution. The SLF3S-0600F liquid flow sensor measures very low flow rates bidirectionally up to ...

We are proud that the AgeTech company CARU AG, integrates our SCD30 CO2 sensor into its CO2 measuring device "CARU air". Thanks to the clear and precise measurement of the CO2 sensor, CARU air ...

At this year's Techday a new challenge is waiting for the participants. With networked thinking, expertise and teamwork, you will try to find new sensor solutions. At the same time, MINT students will ...

Sensirion is proud to announce that the new STS32 temperature sensor will be available from October 2020 onward. This digital sensor comes with an ISO 17025-accredited, three-point calibration ...

The SGP40 is an integrated CMOSens® sensor system on a single chip based on a metal oxide sensor. It provides a humidity-compensated indoor air quality signal via a digital I2C interface. By relying ...

Sensirion is showing solidarity and giving something back. A charitable campaign is under way to help people who are severely affected by the coronavirus pandemic. Sensirion will donate CHF 35’000 to ...

We are proud to announce that TDK is using Sensirion’s state-of-the-art humidity and temperature sensor SHTC3 in its smart multi-sensor wireless module “SmartBug™”. The module has been designed for ...

The PM2.5 Particulate Matter Analyzer from ELV Elektronik AG, which is available as a complete kit and as a ready-to-use device, provides highly accurate measurements of particulate matter pollution ...

Due to positive business trends and the increasing demand for its existing and new sensors, Sensirion is expanding its production capabilities by establishing a production site in Debrecen, Hungary. ...

Sensirion raises its outlook for the financial year 2020. Despite continuing low visibility for the second half of the year, the sensor manufacturer expects revenue for the full year of CHF 200-240 ...

We are very proud that our upcoming SCD40 CO2 Sensor has been selected as a finalist. The SCD40 represents the first CO₂ and RH/T sensor in miniature format...

There is strong scientific evidence that a mid-range air humidity has significant benefits for human health. It is very well possible to control the indoor air quality of our public and private ...

Sensirion, a global leader in environmental and flow sensing started a new initiative across all SFM3xxx flow module platforms for distribution networks worldwide.

As a spin-off of ETH Zurich, Sensirion still has strong ties to the university, with contact between the two occurring via career fairs, academic associations and individual...

NASA has developed a high-pressure ventilator for the treatment of coronavirus patients and, together with the medical community, is fighting against the worldwide shortage of ventilators. The air ...

Automated test results of chromatography applications and analytical instruments don't just enable the optimization of processes and workflows in the area of life sciences...

The sensor network for recording the regional microclimate is largely installed and has been in operation since April 2020. It forms an important part of the "Smart Climate - Plug & Sense" project led ...

Smarter systems, machine learning and ever-increasing amounts of data are creating new possibilities to automate, reduce unplanned downtime or predict maintenance schedules...

At the Annual General Meeting of Sensirion Holding AG on 11 May 2020, the independent proxy represented a total of 9’200’764 shares corresponding to 59.09% of the share capital. The shareholders ...

Sensirion has entered into a cooperation with Alps Alpine in the field of humidity and temperature sensing. Thanks to this cooperation, customers will benefit from both companies’ individual strengths ...

Do you remember your last drive in a car? The key never left your pocket, the climate was perfectly regulated and when the drizzle started, the windscreen wipers automatically swept it away. Anyway, ...

Smart sensor solutions are developing rapidly. They play a key role in the development of the life science, diagnostics and analytical instrument markets, and lead to more cost-efficient systems and ...

Sensirion is announcing a new product variant in the SLF3x series: the SLF3S-0600F liquid flow sensor. The SLF3S-0600F measures very low flow rates bidirectionally up to ±3000 µl/min and offers the ...

The global demand for sensors for ventilators keeps increasing. As a leading sensor technology manufacturer, Sensirion has made a giant development leap and is now introducing the new flow sensor ...

Hospital costs can turn out to be a burden for both the patient and the public healthcare system. Still, a study shows that the rate of avoidable hospitalizations is growing...

Sensirion is proud to announce the partnership with Delta Controls for using Sensirion’s environmental sensors in their thermostat and O3 Sensor Hub. Delta Controls focuses on innovation and ...

Changing care environments can be a burden for patients with conditions such as chronic obstructive pulmonary disease (COPD). Complex care plans, frequent readmissions and...

Sensirion is ready to face the challenge posed by the current economic situation. The need for ventilators is on the rise across the globe. These are systems for which Sensirion provides the sensors. ...

Hot-wire anemometers have set the standard for air flow measurements in respiratory applications for decades. In these, a thin wire is placed in the gas stream and heated...

The miniaturization of components not only enables new dimensions of integration possibilities, but also opens up an unexplored world of innovative ideas for rethinking wellbeing and health...

Artificial intelligence and big data are not only shaping the consumer goods industry – they are also creating a revolution in medical technology that has not been seen for over a century...

Patients with respiratory impairments are often supplied with concentrated oxygen through a nasal cannula. The oxygen is often generated in a portable device ...

In an emergency, intuitive and reliable operation of ventilators is essential for both patients and medical staff. For the past five years, WEINMANN has been working closely with Sensirion ...

Sensirion’s flow sensors have been included in WEINMANN’s MEDUMAT Standard2 since 2015. Thanks to their accuracy, fast response time and ...

Continuous positive airway pressure (CPAP) therapy is a mode of respiratory ventilation, which uses a portable machine and pressurized room air to prevent the ...

Sensirion is the leading sensor supplier for OSA (obstructive sleep apnea ) therapy devices such as CPAPs and has an outstanding record in the field of ...

The SPS30 particulate matter (PM) sensor has achieved MCERTS certification, which proves the sensor performance. In addition, the certification confirms that the SPS30 can be easily integrated into ...

Sensirion, the market leader in air flow measurements, has two new product variants within its SDP800 series of differential pressure sensors. The product versions...

Glow C is an air quality monitor, smart plug and smart nightlight all in one. It monitors indoor temperature, humidity, and airborne toxic chemicals (VOCs) and provides users with real-time insight ...

More than half of patients using an inhaler today suffer from poor disease control and are a long way from achieving optimal therapy. A digital connected air flow sensor as an integral part of an ...

As the leading manufacturer of sensors for the measurement and control of flow and environmental parameters, Sensirion will present the brand new mass flow meter SFM4300 at this year’s Compamed in ...

bluSensor® is using Sensirion’s environmental sensors in its innovative air quality device, bluSensor® AIQ. “There is currently no comparable device on the market that can be used both portably..."

Sensirion experienced a challenging first half of 2019 as a result of the current crisis in the automotive industry, the significantly lower than expected global industrial production, and the ongoing ...

The new all-in-one brand platform walks you through the process of getting access to brand story, corporate identity and corporate design (CI/CD) very fast and makes media easily accessible. The new ...

"Transforming the future of self-care." This is the mission of GlaxoSmithKline (GSK). The global healthcare company develops innovative products to improve the well-being of patients...

The influence that reliable and accurate drug delivery has on the outcome of a therapy is particularly evident in paediatrics and neonatology. Due to the low body weight ...

The SLF3x, Sensirion’s latest innovation in liquid flow sensing, is now available worldwide from Sensirion’s distribution network. Based on Sensirion’s excellent 20-year track record ...

After Sensirion was named the best employer in Switzerland in April 2019 by Great Place to Work®, the expert on workplace culture and employer attractiveness, we received another award from Great ...

The SEK-Environmental Sensing allows engineers to evaluate sensors and develop innovative sensor applications even more quickly and easily. The kit combines plug-and-play hardware with an easy-to-use ...

New technologies open up room for improvements to existing processes, techniques and equipment. Therefore, therapies and procedures in medical technology ...

The solution for gas, humidity and temperature sensing remotely from the main control board is now available worldwide through Sensirion’s distribution network.

We are very proud that our SPS30 particulate matter sensor has won the "Product of the Year 2019" award by German media publisher "Elektronik". A big thank you to all readers who voted for us!

Flow sensor solutions for ventilators that include connectors and cable interfaces were launched in February 2019. They enable patient-side measurement of inhalation and exhalation flows ...

The best employers are innovative, agile and have committed employees, making them more commercially successful. The key to achieving this is an exemplary culture of trust. Sensirion is one of these ...

Sensirion, the worldwide leading manufacturer of high-quality flow and environmental sensors, is launching a new evaluation kit. With the EK-F3x-CAP, expiratory and proximal sensors of the SFM3xxx ...

At this year’s MD&M West trade fair (Anaheim, United States), the sensor expert Sensirion and Quantex Arc Ltd will be presenting an innovative concept study in the field of infusion technology – ...

Filters are used in numerous industries and applications. A filter provides good functionality only if it is undamaged and remains unclogged. It should be replaced regularly to ...

Sensirion presents the new pin-type relative humidity sensor SHT85 for easy replaceability in a wide range of applications. The digital humidity sensor SHT85 is Sensirion's best-in-class humidity ...

Sensirion presents new product variants of the SDP800 differential pressure sensor series. The SDP801-500Pa and SDP811-500Pa complement the product portfolio with an additional I2C address ...

The SPS30 particulate matter sensor is now available worldwide through Sensirion’s distribution network. The SPS30 is the next technological breakthrough in optical PM sensors. Its measurement ...

The solution for humidity and temperature sensing remotely from the main control board is now available world-wide through Sensirion’s distribution network. We now offer a new humidity and temperature ...

Sensirion Holding AG has experienced a good first half-year 2018: Consolidated revenue reached CHF 90.2 million, +30% compared to the previous year’s period.

modum.io AG has developed a compact data logger for temperature-controlled shipments that features Sensirion’s STS3x high-accuracy, calibrated digital temperature sensor. As part of the monitoring ...

At this year’s IoTE 2018 in Shenzhen (July 31 – August 2) we present the SPS30 – a long-term stable, high-accuracy particulate matter sensor. The SPS30 particulate matter (PM) sensor is the next ...

The SCD30 humidity, temperature and carbon dioxide concentration sensor is now available worldwide through Sensirion’s distribution network. CMOSens® Technology for IR detection enables highly ...

This year’s Distribution Meeting EMEA was dedicated to “20 years of Sensirion – 20 years of strong partnership with distributors”. Today, Sensirion’s sensors are sold by 33 distributors worldwide. ...

The SHTC3 is a digital humidity and temperature sensor optimized for battery-driven applications and high-volume consumer electronics. The sensor has been designed to overcome conventional limits in ...

The SGPC3 makes indoor air quality sensing available for mobile and battery-driven applications. With an average supply current of less than 0.07 mA the SGPC3 is able to provide indoor air quality ...

The SEK-Environmental Sensing allows engineers to evaluate sensors and develop innovative sensor applications even more quickly and easily. The kit combines plug-and-play hardware with an easy-to-use ...

Sensirion stands for state-of-the-art technology, innovation and outstanding performance. The Swiss company is the global leader in the manufacture of high-quality sensors and software solutions for ...

The SFM4200 mass flow meter is a new star in the Sensirion range. Thanks to its high pressure resistance, it can be operated at pressures of up to 8 bar and measures ...

At this year’s AHR Expo 2018 trade show in Chicago (January 22 – 24, 2018), Sensirion is introducing the SCD30 – a humidity, temperature and carbon dioxide concentration sensor...

This November, Sensirion organized its inaugural Developer Day in Shenzhen, China. ​​​At the annual distributors' meeting, Sensirion invited distributors from the Asia-Pacific region to take part ...

The new SGM6200 module covers natural gases in group E with up to 25% hydrogen content at a current consumption below 10 µA. New environmentally friendly technologies, such as ...

The high-accuracy temperature sensor has been designed to fulfill the needs of demanding markets such as the medical and automotive sectors. Typical applications include body ...

At this year's MD&M Minneapolis, Sensirion is presenting new and enhanced sensor solutions for measuring humidity and temperature, gas flow and liquid flow as well as differential pressure ...

VP Human Resources Heiko Lambach offers in an interview a deeper insight into one of the best companies in Switzerland as well as Europe and talks about the importance of our employees...

Sensirion stands for innovation. To inspire engineers and developers who are working with our sensor solutions, we have founded a new section called «Sensirion Lab» on our developer ...

Sensirion, the market and innovation leader for digital microsensors, will be attending the COMPAMED 2017 trade fair in order to present its single-use liquid flow sensor LD20 aimed at the fast ...

We are proud to announce that Elgato is using Sensirion’s best-selling humidity and temperature sensor SHTC1 in their critically acclaimed Eve Degree monitoring system ...

At this year’s European Utility Week in Amsterdam, Sensirion will present its innovative and proven microthermal flow modules for smart gas meters. Trade fair visitors can learn everything they need ...

The siloxane-resistant SGP multi-pixel gas sensor is now available worldwide through Sensirion’s distribution network. Based on Sensirion’s innovative MOXSens® technology, the SGP ...

Every health facility that cares for in-patients must have oxygen. That is the vision of the FREO2 Foundation and Sensirion supports this vision. Pneumonia is responsible for more childhood ...

Sensirion strengthens its automotive sensor module business and acquires the automotive business of Auto Industrial Co. Ltd. (AIC). With this acquisition, which includes sites in China, South Korea ...

Sensirion’s around 600 employees have built the longest marble run in the world at Flumserberg. The Swiss sensor manufacturer from Stäfa smashed the previous record of ...

There are times when an application's undetected failing system part could result in damage. Such an example is a gas burner (water heather, boiler). It is important that failures ...

The SDP3x, the world's smallest differential pressure sensor, is now available in an airspeed sensor development kit for VTOL and fixed-wing UAV applications ...

Through perspiration we are constantly losing water over the surface of our skin, which has an influence on the state of hydration on our body. The lost water needs to be replaced by drinking ...

Thanks to the new siloxane-resistant multi-pixel gas sensor SGP and its unique performance, it is for the first time possible to integrate metal-oxide gas sensors into mobile devices ...

At the annual Distribution meeting, Digi-Key and Repcom were awarded with the «Sensirion Distribution Excellence Award». The decisive factor for the election were the strong sales growth over the past ...

The trend of virtual reality (VR) goggles is steadily growing. More and more people are buying virtual reality devices to experience this new way of perception. With this new technology shortly ...

Imagine you are model aircraft pilot and for a perfect start you need to know the actual weather conditions, especially the speed and direction of the wind. With this information, you can reduce the ...

Sensirion has won the Smart Metering Innovation Award at the 8th European Smart Energy and Utility Summit, which took place in London on February 2 and 3, 2017. The jury recognized Sensirion for ...