NEW - Evaluation Kit EK-H5 for Humidity Sensors SHT2x

The evaluation kit EK-H5 is a very simple system to test and evaluate Sensirion’s humidity and temperature sensors. The stick consists of a USB Stick with an adapter to the sensor cable. On one end of the cable there is a connector where the humidity sensor is attached. The application of EK-H5 does not need additional hardware, calibration nor does it require any software programming – only the EK-H5 viewer software has to be installed. The EK-H5 viewer software can be downloaded from this page - find the link in the right column. This way an easy and safe handling of the evaluation kit is assured.

The software is able to apply different resolutions, displaying °C and °F, absolute or relative timing may be chosen and data are displayed in two graphs (relative humidity and temperature). The software also contains data-logging capabilities and data may be exported to Excel format. 

The evaluation kit is provided with one SHT21 on PCB and a connector; however, the system may also be run with an SHT71 or SHT75 humidity sensor.

Content

• 1 USB Stick with cable and connector
• 1 Sensor cable 1m
• 1 SHT21 on PCB with connector 

Delivery Conditions

Characteristics:	Evaluationkit EK-H5 is delivered with datasheet
Minimal order quantity:	1 piece

  Evaluation Kit EK-H5

 

	Datasheet EK-H5
	EK-H5 Viewer Software (.msi)
	EK-H5 Quick Start Guide
	Application Notes
	- Qualification Guide
	- Introduction to Humidity
	- Most Important Formulae
	Related Products
	- Humidity Sensors SHTxx
	- Evaluation Kit EK-H4